I also use a variable Wagner and it has done a excellent job on small shrink
wrap but a not so perfect on large wrap. The heat does not flow evenly
around large wrap to shrink everything uniformly. I once had a chance to
use a lab heat gun with a heat shrink adapter which cups the shrink and
traps the heat. Absolutely perfect shrink. The Wagner looks like it can
take an adaptor but a brief look on their web site did not reveal one. You
can probably make something with tin snips and a small piece of aluminum or
a tin can.
73,
Mark N3GNW
----- Original Message -----
From: "fraz1" <fraz1@bellsouth.net>
To: <towertalk@contesting.com>
Sent: Thursday, August 23, 2007 5:09 PM
Subject: [TowerTalk] Recommendation for heat gun for shrink wrap
> Hi folks.............any recommendation for a good heat gun to be used for
> shrink wrapping would be appreciated. Also, good known sources for shrink
> wrap itself.
>
> 73 John K4NP
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|