Towertalk
[Top] [All Lists]

Re: [TowerTalk] [Tower Talk] Ground wire

To: <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] [Tower Talk] Ground wire
From: "Kenny Young" <towertalk@mindspring.com>
Date: Mon, 17 Sep 2007 19:01:31 -0400
List-post: <mailto:towertalk@contesting.com>
 
Actually the NEC says the smallest conductor that can be paralleled is 1/0.

73,
Kenny, AB4GG
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jim Lux
Sent: Monday, September 17, 2007 4:45 PM
To: Phil Camera
Cc: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] Ground wire

Phil Camera wrote:
> Nope, per NEC, #6 or larger.  I use #4 bare solid.  Don't go cheap 
> now; do it right.
> 
> 
NEC doesn't say it has to be a single conductor.  Yes, your local inspector
might look askance, but if you can make a convincing case that the cross
sectional area of your 3 AWG8 conductors in parallel is greater than a AWG 6
(which it is), then you're good to go.


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.487 / Virus Database: 269.13.21/1012 - Release Date: 9/16/2007
6:32 PM
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.487 / Virus Database: 269.13.21/1012 - Release Date: 9/16/2007
6:32 PM
 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>