Towertalk
[Top] [All Lists]

Re: [TowerTalk] Hy-Gain HG-70HD

To: "'Larry Boekeloo'" <lboekeloo@sbcglobal.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Hy-Gain HG-70HD
From: "Michael Ryan" <mryan001@tampabay.rr.com>
Date: Thu, 10 Jul 2008 16:34:19 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I bought one from MFJ two years ago and it was a ONE piece design.  It had
the base " ears " for attaching the tower itself, welded to a rebar frame.
This is not enough rebar to do the job by any means but it was a good start.
It was heavy, was delivered on a freight truck by a guy who now has no ass (
because I chewed it off for throwing the unit around inside his truck before
taking it off for me).  - Mike

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Allen R. Brier
Sent: Thursday, July 10, 2008 4:04 PM
To: 'Larry Boekeloo'; towertalk@contesting.com
Subject: Re: [TowerTalk] Hy-Gain HG-70HD

I ordered one a couple of years ago. It comes partially assembled (top half)
and the rest comes in pieces that you can either wire or weld on to the top
half. The first one I ordered was delivered bent, so I had Hy-Gain (MFJ)
send a new one. The cost was $350 plus $150 shipping. Probably you could
have one built for less, but I was considering the legal aspects of a
failure of a home built base, so I opted for the factory assembly. Be sure
to buy some special high grade bolts (total 9) for attaching the tower to
the base. The vertical rebar pieces are 1" diameter, btw. 

I mounted a 4-el SteppIR with the options 30/40 and 6 meter elements on the
tower and I am very happy with it. It is very strong.

Allen R. Brier SET N5XZ
President / BriTech Systems Inc.
1515 Windloch Lane
Richmond, TX 77469-2533
281-342-1590
713-705-4801 (Cell)
281-342-0949 (FAX)
britech@earthlink.net

-----Original Message-----
From: Larry Boekeloo [mailto:lboekeloo@sbcglobal.net] 
Sent: Thursday, July 10, 2008 5:04 AM
To: towertalk@contesting.com
Subject: [TowerTalk] Hy-Gain HG-70HD

I am looking at purchasing a used Hy-Gain HG-70HD and see that the TB-70
base is still available.  Does anyone know if the base comes in one piece
with the supporting legs tied together or are they three individual legs?  I
haven't been able to find any diagrams or pictures of the base on the
internet.
   
  Thanks.
   
  Larry, KN8N


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

__________ NOD32 3258 (20080710) Information __________

This message was checked by NOD32 antivirus system.
http://www.eset.com


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>