Getting close to installing feedlines and antennas on the new tower. The
question is how to effectively protect the rotor and remote switches
from lightning and if I should decide to shunt feed the tower.
I have several Polyphaser IS-RCT devices and an I.C.E. product as well.
My plan was to install protection at the SPG at the shack entrance as
well as at the top of the tower. For the tower top installation, is it
really OK to just mount the Polyphaser exposed to the elements? Their
manual indicates that these are weatherized units and should be clamped
to the ground point with the terminals facing the ground. I am a little
nervous about this considering the rain/snow/ice we get up here.
I have seen others that appear to mount the IS-RCT units to the ground
panel in their SPG. As there are no mounting holes on the device, how do
you do this and ensure a good solid ground connection?
As always thanks for the bandwidth and advice?
Ed
VE4EAR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|