Towertalk
[Top] [All Lists]

Re: [TowerTalk] N-connector double-D punch

To: "Michael E Fox (N6MEF)" <n6mef@mefox.org>
Subject: Re: [TowerTalk] N-connector double-D punch
From: "Roger (K8RI)" <K8RI-on-TowerTalk@tm.net>
Date: Wed, 15 Oct 2008 16:39:25 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Michael E Fox (N6MEF) wrote:
> I'm looking for what's called a "double-D" punch that is the correct size
> for N-type connectors.  This will be used to punch holes in bulkheads for
> installing either PolyPhaser DSXL lightening arrestors or N-type Amphenol
> bulkhead pass-through connectors.
>   
I normally use Greenlee "knockout punches". The latest style split the 
piece knocked out into two haves that look like the letter "D", but I've 
never seen them called "double D". 

OTOH material for bulkheads is normally thick enough I just use a drill 
bit of the proper size, be it in steel or aluminum.  IOW it's a rather 
small hole and punches for that size use a relatively small through bolt 
(bout 1/4" to 5/16") that can be broken trying to punch holes in 1/8" to 
1/4" thick, Aluminum, Copper, or steel. I've busted the bolts on chassis 
punches for tube sockets, let alone this size and thickness.  Drill the 
hole undersize, then work up to the proper size one drill at a time. 
This gives a hole with relatively clean and smooth sides however don't 
forget to debur the inside and outside. BTW the hole for the through 
bolt on most of the punches is as large or larger than the bulkhead 
connectors for N or UHF.  (Same size IIRC)

73

Roger (K8RI)
>  
>
> Greenlee doesn't make a double-D that is small enough and I'm having
> difficulty finding the right size anywhere.  
>
>  
>
> This must exist somewhere.  Anyone know where to find one?
>
>  
>
> FYI - if you don't know what I'm talking about, then Google "double-d
> punch".  You will find many out there, most notably Greenlee.  But I haven't
> found any that have the right dimensions for a standard N-connector. 
>
>  
>
> Regards,
>
> Michael  /  N6MEF
>
>  
>
>  
>
>  
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>   

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>