I have a rotor plate for the 470 and the standard(non-HD) 354. It is cut
out for a prop pitch but could probably be modified to work with a T2X. It
is of no use to me as I have a 354HD.
Bob W6TR
----- Original Message -----
From: "donhall161" <donhall161@sbcglobal.net>
To: "Bill Gaines AD8P" <ad8p@wcoil.com>; <towertalk@contesting.com>
Sent: Wednesday, December 03, 2008 4:35 PM
Subject: Re: [TowerTalk] LM-470 and a T2X Rotor
> Bill,
>
> The LM470 and the LM354 both have the same top section.
>
> I have had a T2X in my 354 for all its life. Fitting it in requires a
> special mounting plate to clear the side braces.
> It has spacers to raise it up to allow clearance.
>
> Check Tashjian towers for the one needed or see if someone on this
> reflector
> has an extra.
>
> 73 Don K5AQ
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|