Tony,
I would first replace the DVD cable with one that each line has individual
shields. You might want to go with individual cables. Normally single cables
are shielded. If you have a three wire Siamese cable, I'm surprised it would
not be shielded.
* 73's Jim W5IFP *
>-----Original Message-----
>From: towertalk-bounces@contesting.com
>[mailto:towertalk-bounces@contesting.com]On Behalf Of k2vi
>Sent: Sunday, December 28, 2008 8:09 PM
>To: towertalk@contesting.com
>Subject: [TowerTalk] RFI WITH MY NEIGHBOR...HELP!
>
>
>This is only on one tv in there living room, the other two are
>not effected, I checked for rf cable leakage and it was clean
>on 145.250 throughout the house.This interference is ONLY with
>my voice(ssb) comming thru. The picture is clean.Also it only
>happens on my ladderline fed doublet, the beam is ok.also the
>dipole it used only on 80 and 40 meters.I narrowed it down to
>there jumpers from the tv to the dvd which are not
>shielded.Also no problem with running 100watts but 1kw my voice
>is loud.Any advice would be greatly apreciated, thank you guys.
>
>tony k2vi
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
>No virus found in this incoming message.
>Checked by AVG - http://www.avg.com
>Version: 8.0.176 / Virus Database: 270.10.1/1867 - Release
>Date: 12/28/2008 2:23 PM
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|