Towertalk
[Top] [All Lists]

Re: [TowerTalk] Soldering Iron

Subject: Re: [TowerTalk] Soldering Iron
From: Alton McConnell <amcconnell3@hotmail.com>
Date: Mon, 2 Feb 2009 21:29:12 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
My Weller 100/260 Watt soldering gun works fine for soldering PL 259's inside 
or outside.
 
However, I have found that the connections between the soldering gun tip 
holders and the tip gets corroded and the nuts that attach the tip to the iron 
often need to be tightened befor the gun is used --- otherwise, the PL -259 
heats very slowly.  I can tell when I pull the trigger whether the tip needs to 
be tightened by the vibration and sound that the gun makes.
 
It is also helpful to apply a little solder between the tip and the PL-259 to 
improve the heat transfer.
 
FYI,
Alton,. Nu8L> Date: Mon, 2 Feb 2009 21:10:11 +0000> From: N7KA@comcast.net> To: 
ranchorobbo@gmail.com> CC: towertalk@contesting.com> Subject: Re: [TowerTalk] 
Soldering Iron> > > > The soldering iron I have had since the 1960s does very 
well.  Its what we used at TEKTRO NIX when TUBES still reigned. > > > > Made by 
Americal Electric Heater CO. in Detroit, AMERICAN BEAUTY , Catalog No.3114, 
110Volts 120Watt.  The tip is .250 dia solid copper that we filed to chisel 
tip.  It was handy because I just used it to install some PL-259 connectors 
(AMPHENOL 83-1SP). > > > > Current American Beauty site shows has 3114 listing 
but lower wattage, same .25 dia tips. > > > > Arne N7KA > > > > > ----- 
Original Message ----- > From: "Rob Atkinson" <ranchorobbo@gmail.com> > To: 
towertalk@contesting.com > Sent: Monday, February 2, 2009 8:37:39 PM GMT +00:00 
Casablanca / Monrovia > Subject: Re: [TowerTalk] Soldering Iron > > A gun no 
matter how high watt isn't any good because the tip doesn't > have the metal 
mass needed for soldering a uhf male outside.   You'll > never find the big 
irons at Lowe's or Home Depot.  Berland's House of > Tools has the high watt 
irons you need, made by Wahl with large > massive tips.  They aren't cheap and 
they take forever to heat up and > cool down, which is why I usually don't use 
mine.  I use a torch > instead.    Google Berland's House of Tools.  It may be 
almost spring > in Peoria but up here we have at least 8 weeks. > > 73 > > rob 
/ k5uj > _______________________________________________ > > > > 
_______________________________________________ > TowerTalk mailing list > 
TowerTalk@contesting.com > 
http://lists.contesting.com/mailman/listinfo/towertalk > 
_______________________________________________> > > > 
_______________________________________________> TowerTalk mailing list> 
TowerTalk@contesting.com> http://lists.contesting.com/mailman/listinfo/towertalk
_________________________________________________________________
Windows Live™: E-mail. Chat. Share. Get more ways to connect. 
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t2_allup_howitworks_012009
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>