Towertalk
[Top] [All Lists]

Re: [TowerTalk] US Tower install - help request

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] US Tower install - help request
From: Mat Eshpeter <kk1c@live.com>
Date: Sat, 10 Oct 2009 19:12:18 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks for the tremendous responses. I will begin calling some of you shortly.

For those that I don't end up calling, thanks for the offer.

73,
mat
kk1c

> Date: Sat, 10 Oct 2009 18:41:16 -0400
> From: randy@gte.net
> CC: towertalk@contesting.com
> Subject: Re: [TowerTalk] US Tower install - help request
> 
> AFAIK, it is *crucial* to do it as specified with regard to "undisturbed 
> soil". In other words, they do not want you to dig a hole,
> form it up, backfill behind it and pour. They want a plain ol' hole in 
> the dirt, with the concrete/rebar in it. And, that may be where
> the biggest danger lies, digging an 8' deep hole, straight down. I was 
> lucky, and was able to do it with a Terra Mite mini-backhoe.
> Barely deep enough, though. Obviously, you'd need some form of form to 
> protect you if you were hand digging it.
> Mike, K4CVL had his hand-dug and may be able to offer advice on the 
> temporary "forms" for protection.
> My only comments on the rebar: the drawing seems to show one fewer 
> "hoop" than is indicated in the tables....?
> And, I "X"'ed all 4 sides with pieces 4' pieces of rebar from Home Depot 
> for rigidity while handling...
> I'd gladly talk to you on the phone, if I had any more advice than that 
> to offer.
> Good luck with the project.
> 
> 73,
> Randy
> KZ4RV
> 
> Mat Eshpeter wrote:
> > I am about to install a US Tower crankup model HDX589. I would like to talk 
> > (via phone) to anyone who has installed a US Tower crankup and can help me 
> > with some general questions related to the concrete base work -- rebar 
> > work, Ufer ground, conduit, general questions about how to set the base up 
> > properly, any caveats that I should be aware of.
> >
> > Please send me your contact info and a good time to call this weekend.
> >
> > I do not have an installation manual -- if anyone has a PDF of the 
> > installation manual, I would be grateful to get a copy. At the moment I am 
> > planning on digging a hole with dimensions 5' 6" x 5' 6" x 9' 0" deep; I 
> > got these measurements from the US Tower web site and I hope they are 
> > correct.
> >
> > Also, at the risk of appearing too greedy, I would be grateful for onsite 
> > assistance from any experts willing to travel to the future station 
> > location near Romney, WV. Please contact me off-list.
> >
> > Thanks,
> > Mat
> >                                       
> > _________________________________________________________________
> > Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
> > http://clk.atdmt.com/GBL/go/171222985/direct/01/
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> > ------------------------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com 
> > Version: 8.5.421 / Virus Database: 270.14.9/2427 - Release Date: 10/10/09 
> > 06:39:00
> >
> >   
> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
                                          
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
http://clk.atdmt.com/GBL/go/177141664/direct/01/
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>