Why bother flattening it? It has the same surface area when it is left
round.
73
Gary K4FMX
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Cqtestk4xs@aol.com
> Sent: Tuesday, July 20, 2010 8:33 PM
> To: TOWERTALK@contesting.com
> Subject: Re: [TowerTalk] GROUND SYSTEMS
>
> In a message dated 7/21/2010 12:14:24 AM Greenwich Standard Time,
> k0dan@comcast.net writes:
>
> Copper strap is REALLY expensive! Has anyone used welding cable with any
> success and longevity? Other materials? My #4 grounds are OK, but how to
> get
> a lower impedance ground system without taking out a second mortgage?
>
> I was lucky enough to get some old air filled hardline which I pounded
> flat and used that. It works if you only need short runs since it does
> take
> some time to flatten.
>
> Bill KH7XS...soon to be plain old K4XS again.
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|