,
I listen I learn....
My tower is a lm354hd it is also used, someone had a motor on it and it has
been removed. I have all the drawings and the spec of the motor it is a lesson
112431 .500 motor. I should also mention that I have the 40:1 gear box and the
drummer winding the cable is also there. The motor pulley is speced at
a.625x1.750, and the belts a 4l410 gates 2410, what I don't have is the number
of the pulley on the gearbox I assume that it is in the drawing of the gearbox
drum assy I know that it is a 10inch and I can get the shaft size off the
reducer so I need a number off the 10 inch pulley and a wiring diagram. anyone
HELP Doug WD8Z dcdietz@chartermi.net
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|