Go to http://rohnnet.com/rohn-45g-tower and download or view the
45G Brochure which shows various configurations and recommended
bases/guy anchors.
73, Larry W6NWS
----- Original Message -----
From: <starrose444@aol.com>
To: <towertalk@contesting.com>
Sent: Wednesday, September 14, 2011 7:05 PM
Subject: [TowerTalk] 45g Tower
>
> Again thanks for all the information about using a mid section for a
> base.This is my first tower so I want to do it right.I have 8 10ft 45g
> sections and one 45ag top section would like to make two towers.Each tower
> will only be about 35-45 feet in height I am elevated at 1100 feet now on
> a very large farm.I was told the hole should be about 3x3 and 5 feet
> deep.They will not be aginst the house so I have two sets of guy wires Iam
> thinking a set on each?Any information like how much gravel in the hole
> grounding etc.
>
>
>
>
>
> Thanks
> Bob
> Kc8phb
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|