OK thanks everyone , My rotor is getting old so I'll replace the
Start/Run capacitor with a new one and place it in the junction box
at the base of the tower .. Something tells me this will do the trick
, I'll let you know .
Thanks Ed
At 09:56 AM 11/21/2011, Ed Stallman wrote:
>I'm using a tail twister rotor 350 ft form the control box turning a
>2 el quad, This problem reoccurs each winner when the wind blows
>..Well in fact any time the wind blows .. With the wind 20 mph or
>more the rotor stalls , I did use # 14 wire on the motor leads and I
>have a junction box at the base of the tower were I change to regular
>rotor cable going up the tower .
>
>Heres my Question, can I put a Start or Run Capacitor in my junction
>box and still leave the capacitor in the control box ? would this
>help? Another thought was , could I replace the transformer in the
>control box to a little higher voltage ?
>
>Thanks Ed
>
>_______________________________________________
>
>
>
>_______________________________________________
>TowerTalk mailing list
>TowerTalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|