Hi Chuck.
It looks to be an early EZ-Way. From your pictures I can see a couple
of features that the company used on their towers that leads me to
believe this. 1. is the clapper. It's purpose is to hold the upper
section of tower at elevation and 2. the removable tower head.
Do a quick search online for other examples of EZ-Way towers and you'll
see plenty of pictures of them and the ubiquitous Wonder Post.
73,
Jon Pearl - W4ABC
www.w4abc.com
On 2/25/2012 7:51 PM, Charles Mills wrote:
> Hi all..have a crank up tower I need some help identifying.
>
> It is a crankup and I believe a US tower. Have a bunch of pictures as well
> as key measurements.
> Some key measurements:
>
> Rotor part of tower is 5ft tall
>
> Base section is 21 ft tall
>
> Second section is 10ft tall
>
> Tower Part that cranks up is 20 ft tall
>
> Base is 13 inches on center
>
> 14 inch bar on base section appears to be for tilt over of tower
>
>
> Link to a bunch of pictures is here: http://flic.kr/ps/bsh5Q
>
>
> Thanks,
>
> Chuck / W3YNI
> _______________________________________________
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|