Yes, the handheld GPS will work just fine......
AND, you can use Google earth to find the exact location of your tower for free
(place the curser over your tower or proposed locations and read the Lat/Lon)
and "HFTA" itself is easy to use. The PITA is using Microdem to generate the
terrain files that are needed for import into HFTA to model your own
surrounding terrain.
If you are happy modeling your antennas on flat ground you can start using HFTA
in about 10 minutes.
John, NA6L
-----Original Message-----
From: Gene Fuller <w2lu@rochester.rr.com>
To: towertalk <towertalk@contesting.com>; dotravel <dotravel@aol.com>
Sent: Sat, Mar 3, 2012 8:16 pm
Subject: Re: [TowerTalk] Where to get HFTA Software
RE your exact tower location -
Small handheld hikers GPS units that give Lat. and Long. can be had on eBay
for cheap. I found several Magellan Blazer 12 units in the $25-$50 price
range . They were among the earlier designs for hikers and don't have as
many fancy features as the newer units so the hikers are unloading them. I
find them ideal for my simple minded boating because they give you just what
you need to get from here to there and don't complicate it with a lot of
stuff I'm nor interested in, but they do also give you lat and long, so you
can just take it to the base of the tower and read degrees, minutes and
seconds, which should be close enough and can easily be converted in decimal
equivalents that can be entered into the HFTA program.
I agree that it is a PITA to use HFTA but it does give a lot of good info
for those who persist. Even if you have already committed to your
installation it's interesting to see what kind of performance you might
expect. Or, if your looking for a place to buy or build it's a good
evaluation tool and you'll learn lots about the ups and downs of the
neighborhood within a radius of a couple of miles.
Gene / W2LU
----- Original Message -----
From: <dotravel@aol.com>
To: <towertalk@contesting.com>
Sent: Saturday, March 03, 2012 9:48 PM
Subject: Re: [TowerTalk] Where to get HFTA Software
>
> Jim, if you did build a simplifiied way to enter the exact location of the
> antenna to import into HFTA you would be a hero to the masses because
> Microdem is a true PITA!
>
> Note that unless the site is on flat ground just entering the QTH location
> would not be enough. For the data to be of value, the location of the
> tower needs to be within feet if not inches prior to importing into HFTA.
>
> Regards, John NA6L
>
>
> -----Original Message-----
> From: Jim Lux <jimlux@earthlink.net>
> To: towertalk <towertalk@contesting.com>
> Sent: Sat, Mar 3, 2012 10:09 am
> Subject: Re: [TowerTalk] Where to get HFTA Software
>
>
> On 3/3/12 9:55 AM, Richard Thorne wrote:
>> Where can the software be obtained? Is it downloadable or do you have to
>> by the ARRL antenna book to get a copy?
>>
> Need to get a copy of the ARRL antenna book.
>
>> I'm in the middle of installing my tower and I'd like to run some
>> numbers.
>
> I'd say it would be easy for someone to run it for you, but the real
> value comes from having the terrain data, which is a somewhat complex
> process and location specific.
>
> (although, I've thought about making some sort of web server that could
> take a call sign or lat/lon, generate the terrain files automatically.
> Seems like you could build some interface to Google Earth, for instance.
>
> That's way down on the list of software projects though...
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|