The entire system needs to be looked as well. I have the 4O3A triplexer
good for 4500 watts, however, my stackmatches are only good for 3000
watts. Not issue for my station as its setup for so2r or possibly a
multi-2.
Rich - N5ZC
On 4/19/2016 9:36 AM, john@kk9a.com wrote:
A single op can only transmit one signal at a time so the combined wattage
would only be an issue for multi-ops. This is a good question, can the
triplexer could handle three H.P. stations on simultaneously.
Many contest stations have multiple tribanders pointing in different
directions. For maximum flexibility you may need a triplexer on each beam?
John KK9A
To: <towertalk@contesting.com>
Subject: [TowerTalk] Triplexer
From: "Jim Thomson" <jim.thom@telus.net>
Date: Tue, 19 Apr 2016 06:19:38 -0700
&&& No, what I meant was say 3 amps, all running 1.5 kw RTTY..
simultaneously
= 4.5 kw average power. Per Eimac, that would be the same as a 3 tone
signal,
with each tone having an average power of 1.5 kw.
(Number of tones) squared, X 1.5 kw = 13.5 kw pep out.
13.5 kw pep out = 825V rms = 1166 V peak.
&&& 4.5 kw average, would be max worse case. Still, on CW, with all
3 on TX, it would still be aprx 2 – 2.25 kw average. So it may still work.
&&& The other issue would be the tribander would be pointed in 1 direction,
so all 3 bands would also be in one direction, which may not be what you
want.
But folks with rotating towers face the same dilemma.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|