Hi Jim,
In a similar installation, I´m getting good results with the vertical leg of
the inverted L spaced 4 feet appart off the tower using 3 quarter wave
elevated radials.
The more spaced the better off course. 73s
EC1CT // KD0IGJ Fernando
-----Mensaje original-----
From: Jim Miller
Sent: Monday, May 16, 2016 9:38 PM
To: TowerTalk@contesting.com
Subject: [TowerTalk] Fwd: My question
One of my friends is thinking about installing a 70 ft. tower with a
2-element shortened 40M yagi. He is thinking about installing the new tower
in a location where he now has a vertical used for 80M and 160M (i.e - the
existing radials will terminate at or close to the base of the new tower).
He is planning to relocate the 80M vertical to another location with other
radials. He would like to support an inverted L for 160M off of the new
tower, using the existing radials. His question is, how far must the
vertical leg of the inverted L be spaced from the new tower, with a view to
keeping it close enough to use the existing radials?
Thanks
jim ab3cv
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
-----
No se encontraron virus en este mensaje.
Comprobado por AVG - www.avg.com
Version: 2016.0.7597 / Base de datos de virus: 4568/12243 - Fecha de
publicacion: 05/16/16
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|