If this is what the manufacturer recommends then fine. I have cleaned,
reassembled many small propitch rotators using white lithium grease. The
duty cycle is almost zero and the gearbox oil is the same. For my 2 cents 90
weight oil in Northeast of the US is overkill.
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
WK1W-Ivan Shapiro
Sent: Sunday, September 11, 2016 1:10 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Sorry typo 80/90 gear oil question for UST gearbox
Today's Topics:
1. Oil for Gearbox...80/90 GEAR OIL? (WK1W-Ivan Shapiro)
2. Re: Swinging gate for rotating tower (StellarCAT)
----------------------------------------------------------------------
Message: 1
Date: Sun, 11 Sep 2016 07:53:06 -0400
From: "WK1W-Ivan Shapiro" <WK1W@ivanshapiro.com>
To: <towertalk@contesting.com>
Subject: [TowerTalk] Oil for Gearbox...80/90 GEAR OIL?
Message-ID: <006601d20c23$10e41f20$32ac5d60$@com>
Content-Type: text/plain; charset="us-ascii"
Been reading about oil for gearbox.
Does anyone use 90/90 gear oil.
I used this in the gear box of my wind turbine.
One would think it would e fine for this job,
Thanks. 73
Ivan Shapiro
WK1W
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|