Hi Dave
Utilizing the concrete base from your old crank up sounds like a GREAT idea.
You'll only need to hammer drill One hole for the pier Pin.
What you need is a BP45G base plate and a pier pin. I have used hill Radio
for Rohn products
I have no affiliation with them other then many successful transactions.
http://hillradio.net/HRROHNPL.htm
GL on your Project
Wayne W3EA
________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of Dave Thompson
<thompson@mindspring.com>
Sent: Monday, January 23, 2017 1:40 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Concrete base section
I am in the planning stage for a tower using Rohn 45 sections. I want to use
the big concrete base I used for my crank up and I plan on getting the concrete
base with pier pin.
Do I need a special section of Rohn 45 to go with the concrete base?
I have always used crank ups or telephone poles so not much on Rohn or other
towers. The catalog I have is old (1982)
73 Dave K4JRB
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
TowerTalk Info Page -
Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
lists.contesting.com
TowerTalk is for discussion of tower and HF antenna construction topics. TT
members have lots of helpful information and are happy to share it.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|