Towertalk
[Top] [All Lists]

Re: [TowerTalk] Fwd: Grounding connection to tower legs (Kevin Stover, A

To: Ward Silver <hwardsil@gmail.com>, Reflector <towertalk@contesting.com>
Subject: Re: [TowerTalk] Fwd: Grounding connection to tower legs (Kevin Stover, AC0H)
From: Wayne Kline <w3ea@hotmail.com>
Date: Mon, 16 Oct 2017 20:17:50 +0000
List-post: <mailto:towertalk@contesting.com>
hello TTers.

 In the past
I have used the Rohn tower ground  clamp  or the a pipe SS ground clamp with 
bronze mounting  lug.

Lately I have opted for the DX eng.  unit 
https://www.dxengineering.com/parts/dxe-cgb-150  they make this bare or 
complete kits... I like to break the COAX and add the # 6 copper from this 
bracket to the ground system at the tower  base...


Wayne W3EA



________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of Ward Silver 
<hwardsil@gmail.com>
Sent: Sunday, October 15, 2017 10:35 PM
To: Reflector
Subject: Re: [TowerTalk] Fwd: Grounding connection to tower legs (Kevin Stover, 
AC0H)

Use a proper clamp designed to connect copper wire to galvanized tower
legs.  For Rohn 25, the clamp is part number R/CPC-1.25 and I'm sure
there is a larger one for Rohn 55.  A local electrical supply house will
also have clamps for connecting copper to galvanized pipe.  Ask for it
and follow the installation instructions regarding how to prep the
surfaces and any other cautions.  If you can't get the special clamp,
you can also use bronze grounding clamps over the stainless steel shim.
Do *not* use stainless steel hose clamps - they will blow apart under
the stress of a lightning strike.  You spent a bazillion dollars on the
tower, protect it with the right non-corroding materials that are rated
for the job.

73, Ward N0AX

-----Original Message-----
From: Jeff Blaine<jeff@ac0c.com>
To: towertalk<towertalk@contesting.com>
Sent: Sun, 15 Oct 2017 9:15
Subject: [TowerTalk] Grounding connection to tower legs

What?s the best way to connect the copper wire/strap to the 55G tower leg?

I?m planning to clean the galvanized leg, wrap the leg with a layer of 0.005? 
SS shim stock and then use a couple of SS hose clamps to hold the wire against 
the tower leg.

Is that the right way to do the attachment?

Should I use any copper paste as well?

73/jeff/ac0c
www.ac0c.com<http://www.ac0c.com>

Home [www.ac0c.com]<http://www.ac0c.com/>
www.ac0c.com
Why Your Filter is Not Working. Have technology from space aliens & NSA - yet I 
still can't filter the guy up the band! A Couple of SX-101A Plots



alpha-charlie-zero-charlie

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

TowerTalk Info Page - 
Contesting<http://lists.contesting.com/mailman/listinfo/towertalk>
lists.contesting.com
TowerTalk is for discussion of tower and HF antenna construction topics. TT 
members have lots of helpful information and are happy to share it.



_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>