Just swapped my red/black zip cord K3 power cable for a hand made 6GA twisted
pair... lowered voltage drop to nil.
My speaker cables in the home theater are parallel speaker wire.... they grab
17- 40m transmissions and broadcast over speakers and re-radiate and turn my
wife's mirror lights on...
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: Jim Brown <jim@audiosystemsgroup.com>
Date: 10/17/17 11:03 (GMT-06:00) To: towertalk@contesting.com Subject: Re:
[TowerTalk] FW: Tower Grounds
On 10/17/2017 8:15 AM, Grant Saviers wrote:
> I have never seen a "code compliant" stamped ground rod. Also, I have
> no way to measure Cu plating thickness, but would assume it was
> cheated on as well. Probably they all came from China where 1" = 19mm.
Much of the red/black zip cord sold at hamfests as "speaker cable" and
"power cable" is smaller gauge than marked. The insulation is thicker to
conceal that fact. And zip cord is terrible for RFI -- twisted pair is
FAR better.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|