Mike you are right. There is a push to go with the smaller DIN's. I came
across a bunch of Suhner 4.3/10 DIN adapters and only wish I had a use
for them since these things are really beautiful, very robust, yet way
smaller than a regular DIN. Sadly everything I use here are still N or
PL-259's. If anyone needs some right angle adapters of "T" adapters
contact me off line.
https://drive.google.com/open?id=1rz966a01pJCRLTup9QFE-TqocmStAKJQ
https://drive.google.com/open?id=1TC7JX1GYKHVYnxjOa86fVWiPC-gMhXHd
Gedas, W8BYA
Gallery at http://w8bya.com
Light travels faster than sound....
This is why some people appear bright until you hear them speak.
On 6/26/2018 10:31 AM, Michael Clarson wrote:
Jim: The wireless industry is starting to use another connector -- the
4.3/10 DIN. Much more robust than the Type N, but unlike the 7/16 DIN, it
is sized for greater connector density for feed-lines typically used by
hams. Great. Now I have to get even more interseries adapters! --Mike,
WV2ZOW
https://www.amphenolrf.com/connectors/4-3-10.html
On Tue, Jun 26, 2018 at 10:18 AM Jim Thomson <jim.thom@telus.net> wrote:
Date: Mon, 25 Jun 2018 22:35:21 -0700
From: Avery Davis <wb4rtp@mindspring.com>
To: "Charlie@thegallos.com" <charlie@thegallos.com>
Cc: towertalk@contesting.com
Subject: [TowerTalk] N connector, Re: UHF (PL259) soldered center
with braid crimp or, crimp-crimp, supply?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|