Towertalk
[Top] [All Lists]

Re: [TowerTalk] 80m DX special dipole

To: towertalk@contesting.com
Subject: Re: [TowerTalk] 80m DX special dipole
From: Guido Tedeschi <guidoted@gmail.com>
Date: Tue, 11 Sep 2018 23:10:45 +0200
List-post: <mailto:towertalk@contesting.com>
22.5 pF per foot


Il 11/09/2018 22:41, Jim W7RY ha scritto:
Sent from my wireless communicator

On Tue, Sep 11, 2018, 3:36 PM Jim W7RY <jimw7ry@gmail.com> wrote:

What about capacitance per foot?


73
Jim w7ry



Sent from my wireless communicator

On Tue, Sep 11, 2018, 2:27 PM Guido Tedeschi <guidoted@gmail.com> wrote:

I built an 80m DX special dipole.


http://1vc.typepad.com/ethergeist/2011/01/a-broadband-contest-antenna-for-80m.html

I used the Messi & Paoloni BROAD-PRO 50/C cable instead of RG213
(https://messi.it/dati/immagini/BROAD-PRO50-All6_EN.pdf).

The cable lenghts are recalculated for a velocity factor of 0.85 instead
of 0.66 and the overall lenght (cables plus wires) is the same of the
original project, but the result is not satisfactory.

The SWR pattern is correct but it is like having an offset of about 2:
the two lower dips have an SWR of about 2 and the highest SWR on band
reach 3

What could be wrong?

Is it necessary to use a cable with 0.66 velocity factor?

Thanks and 73

Guido, ik2bcp


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>