Wizzer,
I Had a 5 element 20 36 ft boom no problem. Only issue is the drive motor
gears when the antenna is 180 deg There is a slight rock in the cradle as it
go’s around. A visuial with someone operating it when installed is mandatory .
As with Mr. Anderson there are a few designs for cradle ring bearing
configurations, the best IMO are the side top and bottom rollers
My .02
Touch base with LR and LPL both have 1032’s with big boom antennas
Wayne ,W3EA
Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10
________________________________
From: TowerTalk <towertalk-bounces@contesting.com> on behalf of Charles
Morrison <junkcmp@gmail.com>
Sent: Wednesday, November 6, 2019 5:59:47 PM
To: TOWERTALK@contesting. com <towertalk@contesting.com>
Subject: [TowerTalk] TIC 1048 capacity
Can a two-motor TIC 1048 safely handle a 48ft boom 6L20 that weighs 300 lbs
?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|