Where did you find one?73,Gary K9GS
-------- Original message --------From: Gary <gary_mayfield@hotmail.com> Date:
6/1/20 7:44 PM (GMT-06:00) To: "'towertalk@contesting.com'"
<towertalk@contesting.com> Subject: Re: [TowerTalk] Alliance HD-73 Rotator
U-Bolt Thank You Towertalk. A replacement is on the way!73,Gary
kk0sd-----Original Message-----From: TowerTalk
<towertalk-bounces@contesting.com> On Behalf Of GarySent: Sunday, May 31, 2020
4:29 PMTo: 'towertalk@contesting.com' <towertalk@contesting.com>Subject:
[TowerTalk] Alliance HD-73 Rotator U-BoltGreetings, Last summer
someone in the club decided tighter is better and mangled the threads on the
U-Bolt that is part of the mast clamp on the club's Alliance HD-73 rotator. It
is Alliance part number X-19434-B.An email to Norm's got a message back saying
they will only sell the whole clamp assembly.A trip to several hardware stores
has not turned up anything that fits.I am not a machinist, but my measurements
say the holes it goes through are at most ¼ inch in diameter. They are 3 inches
apart center to center.I would love to find something the same original shape,
but I think a standard U-Bolt shape should work.Anyone know where to get
something that works?Thanks and 73,Gary "Joe"
kk0sd______________________________________________________________________________________________TowerTalk
mailing
listTowerTalk@contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk______________________________________________________________________________________________TowerTalk
mailing
listTowerTalk@contesting.comhttp://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|