Re: [TowerTalk] 220v trench proximity to 7/8” feedline trench?

[Mac <libbysales@austin.rr.com>]

I had the impression he was more concerned about RF and 60hz conflicting 
rather than distance between pipes and sources..
best:  mac/mc  w5mc

On 8/7/2020 2:49 PM, Grant Saviers wrote:
> Code allows low voltage cables above power which should be 24" deep if 
> UF.  for the options see
> https://www.thespruce.com/nec-outdoor-electrical-wiring-tips-1152274.
>
> Grant KZ1W
>
> On 8/7/2020 12:23, john@kk9a.com wrote:
> > There is nothing wrong with using the same trench, why do double work?
> >
> >
> > John KK9A
> >
> > Ed Post W2MKM wrote:
> >
> >
> > Need some guidance as it relates to the proximity of a new 220 V 
> > power line (trenched and in PVC conduit) running to my crank up tower 
> > (3 HP motor) about a 500 foot run from my barn and 2 runs of 7/8??? 
> > hardline (partially trenched through fields and not through the 
> > woods) all terminating at the tower base.
> > What is the minimum that the 220v trench should be separated from the 
> > 7/8??? feedlines trench? they will run parallel for about 250??? then 
> > go their separate ways, 220V to barn, 7/8??? to the shack.
> > Thanks in advance
> >
> > Ed W2MKM
> >
> > Sent from my iPhone
> >
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk