Towertalk
[Top] [All Lists]

Re: [TowerTalk] Cushcraft XM-240 Shortty-Forty questions

To: "'Gedas'" <w8bya@mchsi.com>, "'Reflectors - Towertalk@contesting.com'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Cushcraft XM-240 Shortty-Forty questions
From: "Bill Parry" <bparry@rgv.rr.com>
Date: Sun, 13 Sep 2020 10:08:33 -0500
List-post: <mailto:towertalk@contesting.com>
Mine looked the exactly same. You could substitute my pictures for yours
with the exact same content!  I had to replace all four coils.

Bill W5VX

-----Original Message-----
From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of Gedas
Sent: Sunday, September 13, 2020 9:29 AM
To: 'Reflectors - Towertalk@contesting.com' <towertalk@contesting.com>
Subject: Re: [TowerTalk] Cushcraft XM-240 Shortty-Forty questions

In case you ever wonder what one looks like after taking a hit of
lightning........

https://w8bya.com/Gallery/HAM_RADIO/MISC/images/IMG_0274a.jpg

Gedas, W8BYA EN70JT

Gallery at http://w8bya.com
Light travels faster than sound....
This is why some people appear bright until you hear them speak.

On 9/13/2020 6:09 AM, Jon Zaimes via TowerTalk wrote:
> The newer XM-240s (MFJ) that I've seen use the painted-on coating, not
shrink-wrap as the earlier ones did. I've installed a couple and have not
had any reports of failures.
>
> My own older XM-240, in service here about three years and in Virginia
before that for about 12 years, has the original shrink wrap and screws, and
I've had no problems. But others have had trouble with the screw/wire
connection after some years of service. I have repaired these with a
stainless through-bolt and lock nut.
>
> W1WEF wrote up a detailed fix for this (on the earlier 40-2CD): 
> https://www.yccc.org/Scuttlebutt/2008/Butt0808.pdf
>
> 73/Jon
>
> Jon P. Zaimes, AA1K
> Tower climber for hire
> http://www.aa1k.us/
> Cell: 302-632-2353
>
> Reviews of AA1K tower work on eham website: 
> http://www.eham.net/reviews/detail/12922
>
> Hug your favorite tower every day, and always stay connected to it.
>
> -----Original Message-----
> From: TowerTalk <towertalk-bounces@contesting.com> On Behalf Of RVZ 
> via TowerTalk
> Sent: Saturday, September 12, 2020 6:08 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Cushcraft XM-240 Shortty-Forty questions
>
> Hi Guys,
>
> I purchased a Cushcraft XM-240 which was new in the box but was made about
10 years ago.  The label on the box says "Cushcraft XM-240", and doesn't
mention MFJ, so perhaps it was made by Cushcraft.   My questions pertains to
the 4 loading coils.  I believe the loading coils made by MFJ have heat
shrink tubing over the coil, is that correct? The loading coils on this
XM-240 don't have heat shrink tubing over them, rather the coil is covered
with a thick shiny black epoxy which is very hard.  The epoxy has really
sealed up the coils and self tapping screws that connect the coils to the
aluminum tubing.  I believe the epoxy would be rather difficult to remove so
I'm wondering if I'm likely to have reliable results using the traps "as-is"
for a couple years, or if I should remove the hard epoxy from the self-
tapping screws now and replace them with screws, nuts, and lock washers?  If
I do replace the screws, should I cover them with more epoxy, use heat
shrink tubing, or both?  Thanks
  &
>    73, Dick- K9OMWisconsin 
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>