Towertalk
[Top] [All Lists]

Re: [TowerTalk] Where to get LMR 400

To: "'jimlux'" <jimlux@earthlink.net>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Where to get LMR 400
From: <dj7ww@t-online.de>
Reply-to: peter.voelpel@t-online.de
Date: Tue, 3 Nov 2020 18:32:45 +0100
List-post: <mailto:towertalk@contesting.com>
Yes, the current heats up the dielectric around the center conductor.
RG393 with the same conductor size and its PTFE dielectric is specified at
9500W on 6m.

73
Peter 

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
jimlux
Sent: Dienstag, 3. November 2020 18:10
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Where to get LMR 400

On 11/3/20 8:24 AM, dj7ww@t-online.de wrote:
> RG213 is specified with 1300W on 6m
> 
> 73
> Peter


MIL-C-17/74 (RG 213 spec) sort of says that..

It says 3700V rms maximum

Figure 2 shows the "straightline" from 1200W (@50 MHz) down to 180 W 
(@1000 MHz), probably based on thermal limits from the current in the 
center conductor - 0.0888" OD seven strands that are 0.0296" each 
(between AWG 20 and AWG 21)

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>