On 12/27/2020 4:59 AM, maflukey@gmail.com wrote:
Recommend to confirm the mast OD by
measurement with a mic or dial caliper, especially if you are using
repurposed masts...
Right. When I tried to lower my old mast through the TB3, I found that
the boom to mast clam had distorted it enough that it wouldn't fit,
making it a lot harder to get the mast down. The new one went up that
way, but I fit tested it on the ground first.
73,
Scott K9MA
--
Scott K9MA
k9ma@sdellington.us
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|