Hi Martin, I will get you the nom. OD of # 14 and # 12 bare Flex-Weave Tm
(also comes PVC and PE insulated) tomorrow when back in my office. In case
you don’t know, either of these wires can be knot-tied using a bowline knot.
The knot will not slip or break. It will hold up to the tensile strength of
the wire itself.
Flex-weave Tm is a product I introduced back in the 1880’s, and is still very
popular with hams and military, hence, you are using it. HI 73, Steve
K1PEK, DAVIS RF Co. Also: Davis Rope and Cable, LLC
Message: 3
Date: Sat, 19 Nov 2022 16:56:15 -0500
From: Martin Flynn <maflynn@theflynn.org>
To: towertalk@contesting.com
Subject: [TowerTalk] Flexweave Question
Message-ID: <3548265f-d3c5-d853-4568-d6bcf2f31da4@theflynn.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Any suggestion on the correct thimble size and nicopress (compression)
sleeve that would be used with #14 and #12 Flexweave?
Martin
W2RWJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|