For sale 1/2 inch hardline, Andrew FSJ4-50B - connectors installed , glued and
booted by Andrew. $30 each plus shipping Note: I use hardline for the rover
on all bands above 222. Right angle N or 7/16 DIN connectors are great for
connecting to Bird directional coupler blocks and then jumpering to rig with a
short length of LMR-400 or RG-214.
30 ft 7/16 DIN(M) to N(M) rt angle
29 ft N(M) to N(M) rt angle
26 ft N(M) to N(M) rt angle
25 ft 10 in N(M) to N(M)
M2 2M9 9 element 144 mhz beam, partially assembled, never used, $110
M2 2 port 144 power divider, new, $60
Phasing lines for M2 144 stack (2 lines) new from Directive Systems,
LMR-400 w/N's, $45
Klein Canvas bucket, $35
Alliance HD-73 Rotator, purchased rebuilt from Norm's Rotor Service, never
used, $325
Tohtsu CX-530D 12V N to (2) TNC, like new, original owner - $65
Heil footswitch - $10
Heil Handswitch - $10
Heil short (6 in) boom base - $10
Heil 6 ft mike cable CC1-Y for Heil Pro mike to Yaesu (yellow) - $25
Heil ProSet Headset adapter for Kenwood AD1K (red) - $10
Heil ProSet Headset adapter for Yaesu AD1-Y (yellow) - $10
Note: the following Bird items are original owner, no knockoff, no roll off
table, Chinese, e-bay or clones. All are like new condition
Bird UHF(F) QC adapter(s) - $15 ea
Bird N(F) QC adapter(s) - $18 ea
Bird 50 W 50-T-FN dummy load w/N connector - $65
Bird 25C slug, 100-250mhz - $65
Bird 10A slug, 25-60mhz - $65
Bird 250C slug, 100-250mhz - $70
Coaxial Dynamics 130-150, 250mw - $65
Bird blank aluminum slug(s) - $10 ea
Coax 7/16 DIN Adapter(s) rt angle M-F - $25
Coax 7/16 DIN Adapter N(F) to DIN(M) -$35
Coax 7/16 DIN Adapter(s) N(M) to N(M) -$40
All items shown without shipping (FedEx Ground)
John B. N8UM Oak Ridge, Tennessee
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|