VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] Trailer Hitch Rotor Mount

To: David All <n3xudfm19@gmail.com>
Subject: Re: [VHFcontesting] Trailer Hitch Rotor Mount
From: "Mike (KA5CVH) Urich" <mike@ka5cvh.com>
Date: Fri, 12 Jul 2013 16:59:52 -0500
List-post: <vhfcontesting@contesting.com">mailto:vhfcontesting@contesting.com>
On Fri, Jul 12, 2013 at 4:05 PM, David All <n3xudfm19@gmail.com> wrote:

> Is that an online only product or is it available in stores?
> I Like what you have done.

> Do you use any support further up the mast?  Is that a push up mast your
> using?

Mike wrote

Northern Tool ... usually ... has them in the stores, check first.
Harbor Freight doesn't carry that part.

The push up in the picture is the 20 flag pole from HF.  I do not guy
it.  I also have a 50' Rohn push up that does get appropriately guyed.

Right now I have is set up with my 3l yagi trying to catch K4N all day
... anyone had any luck?

http://www.ka5cvh.com/p/station_ka5cvh_portable/50_mhz_3_ele.jpg


-- 
Mike Urich KA5CVH
http://ka5cvh.com

"My cars all run on recycled dinosaurs"

PIO - D14 S/E - http://harriscountyares.org
APIC - D1 & D14 - http://www.arrlstx.org

Life is hard, church shouldn't be!
http://fairmontpark.org
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>