On Mon, Jul 15, 2013 at 6:32 AM, Dan Evans <k9zf@yahoo.com> wrote:
> to build mine that was sent to me by L.B. Cebik. I used 1/2" copper pipe to
> make a couple this way, and they performed very well. (although they were
> very heavy...)
Mike wrote
Thanks, that confirms a part of what I presumed to be true. Just
looking for a little confirmation. I was thinking about using 1/2
copper as well. I also found one made from small angle aluminum like
you can buy at Home Depot and just drilled and screwed it together.
I have a couple of pictures of yours on the Ranger and F150 with what
appears to be a CC A148-10S
--
Mike Urich KA5CVH
http://ka5cvh.com
"My cars all run on recycled dinosaurs"
PIO - D14 S/E - http://harriscountyares.org
APIC - D1 & D14 - http://www.arrlstx.org
Life is hard, church shouldn't be!
http://fairmontpark.org
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
|