VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] M2 5WL 2 meters

To: VHFcontesting <vhfcontesting@contesting.com>
Subject: Re: [VHFcontesting] M2 5WL 2 meters
From: Ethan Miller K8GU <ethan@k8gu.com>
Date: Tue, 8 Jun 2021 17:03:45 +0000
List-post: <mailto:vhfcontesting@contesting.com>
hi all,

It's imperative that you call Joel to ask about the connector rather
than just look at the web site if you need something specific.  He
does stock (sometimes in small quantities) a lot of things that are
not on the web site, which is sort of a "guide" to what he carries
that satisfies most ham needs.

73,

--Ethan, K8GU (who has spent many thousands of dollars at The RF
Connection for work and hobby).

On 6/8/21, Terry Price <terry@directivesystems.com> wrote:
> If it is a 3/8 fine thread he will have it, I use these on our 2m and 6m
> antennas and I get them from him.
>
> Terry
>
> On Tue, Jun 8, 2021, 10:23 AM Bill Olson <callbill@hotmail.com> wrote:
>
>> Joel doesn't have this connector in his catalog, but he will probably
>> know
>> about it. I have seen these and think I even had some at one point.. I am
>> checking the "junque" (good luck with that!!)
>>
>> bill
>>
>> ________________________________
>> From: VHFcontesting <vhfcontesting-bounces+callbill=
>> hotmail.com@contesting.com> on behalf of Ray Golley <rgolley@comcast.net>
>> Sent: Tuesday, June 8, 2021 9:01 AM
>> To: Herb Krumich <wa2fgk@yahoo.com>; Herb Krumich via VHFcontesting <
>> vhfcontesting@contesting.com>
>> Subject: Re: [VHFcontesting] M2 5WL 2 meters
>>
>> Herb
>> Check with Joel at The RF Connection.
>> Call 301.840.5477 or Email rfc@therfc.com
>>
>> de
>> N3RG Ray
>>
>>
>>
>>
>> > On 06/07/2021 10:11 PM Herb Krumich via VHFcontesting <
>> vhfcontesting@contesting.com> wrote:
>> >
>> >
>> > I'm trying to do a repair of a long yagi for 2 metersI think it's a
>> 5WLThe center pin on the Female N is badI checked with M2 and to replace
>> the the DE is 75$ plus shippingUnGODlyI took the small aluminum box
>> apart,
>> took out tons of goop, and got the N connector unscrewed.Other than M2,
>> does anyone know where I can get a connector replacement ?For sure this
>> is
>> not a normal NThe threaded part that screws into the aluminum block is
>> about 3/8 inch fine threadThank you guys.Will give out some points Sunday
>> afternoonHave funHerb K2LNSCall always used on VHF is WA2FGK
>> > _______________________________________________
>> > VHFcontesting mailing list
>> > VHFcontesting@contesting.com
>> >
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Fvhfcontesting&amp;data=04%7C01%7C%7Cef8762ca91e344880d4d08d92a5c06f0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637587397014905816%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=5AQ6ixYkI8AaR5LeX13aaSHWnVDso63pYyqa%2B4%2Btsxg%3D&amp;reserved=0
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting@contesting.com
>>
>> https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.contesting.com%2Fmailman%2Flistinfo%2Fvhfcontesting&amp;data=04%7C01%7C%7Cef8762ca91e344880d4d08d92a5c06f0%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637587397014905816%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=5AQ6ixYkI8AaR5LeX13aaSHWnVDso63pYyqa%2B4%2Btsxg%3D&amp;reserved=0
>> _______________________________________________
>> VHFcontesting mailing list
>> VHFcontesting@contesting.com
>> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>>
> _______________________________________________
> VHFcontesting mailing list
> VHFcontesting@contesting.com
> http://lists.contesting.com/mailman/listinfo/vhfcontesting
>


-- 
http://www.k8gu.com/
Repair.  Re-use.  Re-purpose.  Recycle.
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting

<Prev in Thread] Current Thread [Next in Thread>