Hi Robert:
I don't have a PK232, but did try to help Vic VE6PC get his going with
Writelog. Although we were unsuccesful in getting it going, I woould
suggest you consider at the following. If you use PC-Pakrat make sure
that it is set to
HOST MODE ON EXIT - DISABLED
and FAST INITIALIZATION - DISABLED
you could also try a slower baud rate e.g. 2400,N,8,1
We had marginal success after hours of fooling around and Vic ended up
buying a KAM+
73
Raj VE6RAJ
Robert D. Edmondson wrote:
>
> I just purchased Writelog V9.12c & am having trouble getting RTTY to
> operate.
> I am using a PK232MBX TNC & when I try to initialize the unit I
> receive.
>
> INITIALIZING HOST MODE
> PLEASE WAIT
>
> After waiting for several minutes the WAIT window is still there &
> nothing
> happens.
> I am using COM5 at 9600 8/none/1/Xon-Xoff.
> I also added the following to the Writelog.ini.: com5=9600,n,8,1,x
>
> The TNC works fine with the RTTY program in Dx4Win.
> I must be doing something wrong, any help would be appreciated.
>
> 73's Doyle/N4VV
|