This worked for me, using 5160 labels:
On the QSL Printing Setup dialog (File | QSL Page Setup...) :
Number Across: 3
Number Down: 10
Number to skip: 0
Left edge to left edge: 141
Top edge to top edge: 230
Distance from left edge: 4
Distance from top edge: 13
Printed nice looking labels - be careful of the font size or you'll run off
the right edge of the page. You could also probably change the "distance
from left edge" to 0 or so and still fit the labels nicely (there is
apparently an additional offset generated by WriteLog.)
-Marty NW0L
martyt@pobox.com
At 02:36 PM 1/15/01 -0500, Jim Reisert AD1C wrote:
>Does anyone have a setup for Avery 5160 QSL labels for Writelog? I
>changed the defaults to 3 across, 10 down but the three across were pretty
>squished together.
>
>Thanks - Jim AD1C
>
>--
>Jim Reisert AD1C <jjreisert@alum.mit.edu>
>Read our Holiday message at http://www.ad1c.com/
>
>
>--
>WWW: http://www.writelog.com/
>Submissions: writelog@contesting.com
>Administrative requests: writelog-REQUEST@contesting.com
>Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|