I believe it has always worked that way.
The way we use it here is just record at the same time you are doing it for
real.
If you don't like it, then reocrd the next one you do.
Kills two birds with one stone.
Call a CQ and record it for use.
Who knows, you may even get an answer.
good luck to all in ARRL SSB
See you in the pileups from
KV1W M/M - WriteLog Powered Contesting
----- Original Message -----
From: "Marty Tippin" <martyt@pobox.com>
To: "GARY BELCHER" <kh6gmp@shaka.com>; <writelog@contesting.com>
Sent: Tuesday, February 27, 2001 19:44
Subject: Re: [WriteLog] On The Fly Recording
>
> That's just the way it works... Always has as far as I know.
>
> Turn the rig off or use a dummy load if it's too annoying (I usually just
> turn the power down and don't worry about it..)
>
> 73,
>
> -Marty NW0L
> martyt@pobox.com
>
> ----- Original Message -----
> From: "GARY BELCHER" <kh6gmp@shaka.com>
> To: <writelog@contesting.com>
> Sent: Tuesday, February 27, 2001 1:27 PM
> Subject: [WriteLog] On The Fly Recording
>
>
> >
> > It seems like it never used to but lately when I tried to use the shift
F2
> > to record a CQ call 'on the fly' that it keys the transmitter. Have I
got
> > something set wrong? Using WL and an FT1000MP with the CAT port from rig
> to
> > the serial port of the computer. All is fine except would rather not
have
> > the transmitter key when doing those records. Any help? ALOHA and hope
to
> > see everyone this weekend in ARRL DX de KH6GMP
>
>
> --
> WWW: http://www.writelog.com/
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
>
>
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|