WriteLog
[Top] [All Lists]

[WriteLog] Re: [DX4WIN] import help

To: <writelog@contesting.com>
Subject: [WriteLog] Re: [DX4WIN] import help
From: garry@ni6t.com (Garry Shapiro)
Date: Sat, 1 Dec 2001 05:53:23 -0000
Frank:

The answer is found in the DX4WIN Help file. Export your WriteLog contest
file as a Comma-Delimited ASCII file, then import that file into DX4WIN
using the WriteLog selection on the DX4WIN Import menu.

Yes, two steps. If you need to know why, ask the developers. I just work
here.

Garry, NI6T




__________________________________
160 meters---not a band but an obsession


-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com]On Behalf Of Frank Grossman
(WB2BXO)
Sent: Saturday, December 01, 2001 05:27
To: Dick White; Reflector DX4WIN
Cc: writelog@contesting.com
Subject: [WriteLog] Re: [DX4WIN] import help


I, too, am stuck on an Import problem...

Specifically, I want to pull my Writelog CQWW CW file into DX4WIN.  DX4WIN
has a Writelog selection on the Import menu, but it doesn't seem to see my
Writlelog file when the Import File Window opens.  I am looking at the
correct directory.

Now, I know there are some workarounds, like converting to ADIF or
something, but why should I need to do that when there's a Writelog
selection on the Import menu?

Thanks!
Frank
wb2bxo@arrl.net

----- Original Message -----
From: Dick White <KS0M@ktis.net>
To: Reflector DX4WIN <dx4win@qth.net>
Sent: Friday, November 30, 2001 5:59 PM
Subject: [DX4WIN] import help


> Looks like I did it again. I tried to import the CQWW CW log from CT to
> DX4WIN. When I did, DX4W did not recognize any of the 309 callsigns or
> prefixes and none of the bands were correct.This is what the errors were:
> "Error: callsign = ( all 309 calls)  Band = 1"  There were a total of 508
> errors. So, I really messed up. This is what I did:
>
> 1-Manual, on Importing a log file: Says to genrate a temp file and if ok
> merge with main file.  I did not do this as I was not sure how to make a
> temp file or merge (  does file/new make the temp file and if so, how do
you
> merge it ?).
>
> 2-I can not find an export format in the CT files.
>
> 3-I went ahead and tried an import. Selected the impot filter as "CTBIN9
for
> CT v9.xxx" (my version = 9.65).
>
> 4-The calls all went to my DX4WIN log, but I had all the erors noted
above.
> To get the calls to record correctly requires re-entering the call,
> correcting band and code number and deleting the error message.
>
> I messed this one up. So, how do I do it next time I use CT to import the
> correct information and not have to edit each entry ?
> Maybe I need to know how to make a temp file, correst it and then merge
into
> my regular file. The manual is not clear enough to me to figure out how to
> do this. I ned more instructions than the manual gives.
>
> Thanks ...... Dick  -  KS0M
>
> Richard C. "Dick" White           ks0m@ktis.net
> Fulton, MO. 65251-2215
>
> Amateur Radio Station - KS0M    (ex WB0WLX  -  KC0MY)
> ARRL DX Honor Roll / CW  -  5BDXCC #3295 / CW
> Life Member,  American Radio Relay  League
>

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog


<Prev in Thread] Current Thread [Next in Thread>