WriteLog
[Top] [All Lists]

Fw: Re: [WriteLog] WriteLog10.30/LPT/W9XT Card ...

To: <writelog@contesting.com>
Subject: Fw: Re: [WriteLog] WriteLog10.30/LPT/W9XT Card ...
From: k2qmf@juno.com (k2qmf@juno.com)
Date: Sat, 26 Jan 2002 13:32:14 -0500
I am having the same choppy CW condition using 10.30.
It was so bad that it was unusable here and I had to go
back to CT.

I am using a Pentium III 866 Mhz with 256 Meg of ram.
Running Windows 98SE...
Older version of WL was not any where as bad as 10.30..

Please Help..   73,  Ted  K2QMF


On Sat, 26 Jan 2002 11:37:55 -0000 "Jon Suehiro" <nn5t@attglobal.net>
writes:
> 
> Just woke up and decided to play CQ 160 CW, updated to 10.30 the 
> other day
> but first time to play with.
> 
> As I have seen as "choppy cw" previously on this reflector, I am 
> another
> victim of CW keying problem.
> 
> When I operated CQ WW CW with 10.28, it was OK.   O/S is Win98SE, 
> nothing
> changed since then.
> 
> Am still using W9XT card just for CW keying as LPT2.   Voice is by 
> sound
> card and should be OK (was OK on SS Phone with 10.28).
> 
> Checked on K9JY site and repeatedly mentioned WL does not support 
> W9XT on
> LPT, is this same to my situation on 10.30 ?
> 
> FSK through serial port is working OK for RTTY.   Is it time to 
> remove W9XT
> card and built a keying circuit on COM port ?   Of course disabling 
> virus
> protection did not help at all.
> 
> If I can still use this card for CW keying with less effort than 
> building
> one transistor keying circuit, please advice.
> 
> Thanks.
> 
> Jon Suehiro, NN5T
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> 
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.

<Prev in Thread] Current Thread [Next in Thread>