WriteLog
[Top] [All Lists]

[WriteLog] Notes on MK-1100 Multi-keyer

To: <writelog@contesting.com>
Subject: [WriteLog] Notes on MK-1100 Multi-keyer
From: W3YY@aol.com (W3YY@aol.com)
Date: Tue, 25 Jun 2002 19:35:55 EDT
I'm in the process of integrating a MK-1100 Multi-Keyer into the shack.  I 
purchased this unit despite some serious questions about the keyer's 
functions, but I'm pleasantly surprised with how it works.  For those of you 
who don't already have the unit, but might have some of the same questions I 
did, here are the answers:

Q:  Does the keyer paddle speed track the speed as set in WriteLog or the 
external manual speed control?  I was afraid that the paddle would operate at 
a different speed than the internal WriteLog speed. 

A:  No problem!  The keyer "grabs" the last speed change, whether it is from 
within the program or the external speed control, and syncs both the internal 
messages and the paddle to that speed.  This is perfect!  Nice job Wayne.


Q:  How do I connect the Multi-Keyer to my PC? 

A:  With the help of K5ZD, the answer is a straight through DB-9 male to DB-9 
female cable, Radio Shack 26-1117B.  Works perfectly.

Unless this information is already in the "documentation", why not add it?  I 
think this is pretty basic info that most would like to know before spending 
$200+ on hardware.

73, Bob - W3YY

<Prev in Thread] Current Thread [Next in Thread>