Go for it!!!! I purchased the (8) eight port with the breakout hub and run
it in my XP Pro system and it works great!!!!
REN WB3FSR
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Wayne Bailey
Sent: March 08, 2003 11:20
To: 'Ted Huf W4ZE'
Cc: Writelog@contesting.com
Subject: RE: [WriteLog] Windows XP Multifunction Card
Go to http://www.byterunner.com/
I purchased the 4 serial port card and it works great, easy to install
and set up. Comes with driver card, etc.
Also from the K9JF Web site link to K1NU for a serial cw keying cable.
Works great. I had major problems with CW Stuttering using the parallel
port.
73 de Wayne, NX7K
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Ted Huf W4ZE
Sent: Saturday, March 08, 2003 4:10 PM
To: Writelog@contesting.com
Subject: [WriteLog] Windows XP Multifunction Card
Could anyone recommend a Windows XP Service Pack 1 compatibly PCI
multifunction card so I can add 3 or 4 RS-232 com ports and a printer
LPT
port? I suppose that with a PCI card, interrupts will not be a problem?
This Dell computer came with only 1 of each. I had trouble with RF
trying
to use a Xircom USB multifunction and it is not supported on XP now
anyway.
Ted Huf
W4ZE
Hickory, PA
w4ze@arrl.net
http://www.qsl.net/w4ze/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
|