First things first, Thanks! everybody who answered my pleas for help.
I realize that it was the same old question that we have been dealing with for
sometime now. But I had looked at the archives believed that I had every set up
correctly.
Last night I was going to un-install USER PORT and then re-intall it in hopes
that maybe it wasn't being loaded for some reason for WL. I was grasping at
straws because the CW keying was working just fine with DX4WIN. And had worked
for the CQWW CW in the fall.
Before I did that I took another look at the INI file and noticed that the
address for the LPT port did not look right. So I went into the device manager.
And found that SOME HOW!!! one of Murphy's gremlin's went and changed the LPT
port address in the INI file.
Needless to say I changed that and the CW keying works just fine.
I am not what you might call a genius with computers but how can this happen
with out actually going in there and making the change.
So I guess this is another thing to keep in the back of our minds when we are
dealing with this CW keying problem.
Thanks again
John
N5ER
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|