> I have been using Writelog now for about 2 years. After each contest ends,
> I export the data to an ADI file and then import it into DXBase 2004
> (previously 2003). DXBase is my master log and allows combining PSK/RTTY
I am in the same situation, I export ADIF files from Writelog
and import them to Logger.
> Recently I generated a report to see where I stood on WAS, since in the ARRL
> RTTY RU I had worked all but 2 States. Surprisingly I found only a very few
> States. Looking into it further, I discovered that Writelog does not
> identify the State for each QSO and thus does not put it into the ADI file.
> I ended up looking up every record and manually inputting the State into
> DXBase. Quite a time consuming job.
I did the same thing, but I had only 115 QSOs, so it was not
a problem.
> So my question is for all the Writelog "experts", is there a way to have
> Writelog look these up and insert the State. I can't find anything in the
> help file on this. On the other hand, for those DXBase "experts", is there
> a way to get DXBase to look each record up and insert the State.
If you look into the ADIF file produced by Writelog, you shall
discover that in the ARRL contest it saves the State as:
<QTH:2>DE
<QTH:2>MD
<QTH:2>MI
etc.
So you can rename the "QTX:2" to "WAS:2" or whatever your logging
program expects.
73 Costas SV1XV
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|