Yesterday I wrote that AR and WL was not
communicating.
Today I have great news, All I had to do was to Check
"Configuration>Ports>LocalNetwork>Telnet". It worked
very well and is a very nice interface. I still have
to figure out how to use it. But will be nice to get
the CW/RTTY spots only in WL
Joe K0BX
>
--- "k0bx@qsl.net" <k0bx@yahoo.com> wrote:
> I want to thank all that responsed to my question
> concerning AR with Writelog.
>
> I have not got it to work yet. But since AR is
> working in a stand alone mode, and Writelog Telnet
> is
> working fine, then I would assume that the problem
> is
> in the setup. So I am at work this morning and went
> to the VE7CC website and "RTM" (Read the manual).
>
> I think my problem is that in the configuration, the
> communications menu, that I do not have anything
> 'Checked" in the Local Network. I think that I need
> to have 'Telnet' checked.
>
> * AR User - Check "Configuration>Ports>Local
> Network>Telnet".
> * Logging Program - Telnet to 127.0.0.1:7300 if
> in
> same machine.
> * Logging Program - Telnet to IP address (port
> 7300)if in different machine (ie 198.162.100.1
> :7300)
>
> I will report if this is the fix after I get home
> tonight and try it.
>
> Sorry for the bandwidth, but maybe this will help
> someone else too.
>
> Joe K0BX
> 25 years in Information Systems and still can't read
> the manual!
__________________________________
Do you Yahoo!?
Yahoo! Mail SpamGuard - Read only the mail you want.
http://antispam.yahoo.com/tools
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|