Just got all four Stations up and running using the TCP/IP capability.
The problem I was having was causes by a Windows XP setting and Not
Writelog. Windows XP was blocking communication between the machines as
firewall protection. I cause telnet to a packet cluster but could not
communicate between the machines.
Thanks for all the help
And I hope Ron adds the auto-reconnect feature between computers before
CQ WW SSB this year.
73 Bill W4RM
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Clive Whelan
Sent: Sunday, September 19, 2004 10:30 AM
To: writelog@contesting.com
Subject: RE: [WriteLog] TCP/IP Networking and 10.49D
W4RM wrote
<<Has anyone had any luck networking multiple computers using the new
TCP/IP in 10.49D? I have tried for hours to make it work at the home M2
station with 4 computers and have had no luck. Any help would be
great.>>
After perennial difficulties up to and including 10.48x, I have finally
succeeded with 10.49d from XP Home to XP Pro, using an 8.11g to 8.11b
wireless network.
First set up on computer A
Then load that log across the network into computer B
Then save the log in computer B ( must have its own copy N.B.)
Then setup|register to accept network connections on each, observing the
correct computer names on the network.
Then setup|link to network on computer B, and you should get a little
box
telling you what has been done. If unsuccessful, the box will flash.
That should crack it!
73
Clive
GW3NJW
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|