Chuck,
Both work together for me just fine! I use Windows 2000 Professional
plus Writelog 10.52F and a IC-756PRO and an IC-756PROIII.
My set up for DVK:
Let's start with theMicroHam KEYER: I have two virtual ports:
microHAM USB Device Router Tabs:
Ports:
Audio: PTT/FSK
Radio Control - COM4 From Left to
Right Top to Bottom
FSK- COM3 Select A
C A PTT1
CW COM3
DTR
PTT2
PTT COM3
RTS
PTT1
Writelog Setup:
Ports
COM3 CW selected No Rig Auto
Poll checked Comm PTT Yes
COM4 Not checked Icom 756ProII 9600 Poll
checked Comm PTT Yes
DVK type - Windows sound board
All mode PTT on CWport RTS - checked
CW keyer - PC generates
Wave Files Locate - C:\ham\WaveFiles (you need at least one .wav files
in the subdirectory)
CW Speed
CW PTT - On LPT pin 16/COMM RTS checked
Writelog Tools:
Sound board options
WriteLog Sound Board setup:
Enable Recording Loop - checked
Echo Microphone - checked
WriteLog Sound Mixer Level Control (access from
Start-Programs-WriteLogV10- Soundboard mixer control
My info for this tab: I use a $10.00 Avance Logic ALS-4000 stereo sound
card I purchased at CompUSA. Tests at 7f with sbrdchk.exe
Audio out - Avance Sound
Mixer - Avance Sound Audio in -Avance Sound
Audio review - Avance Sound
Receive selection - Line
Left Radio Active - checked
Msg play level Active - checked
Msg level - Active - checked
******************************************************
I assume you purchased the optional control cable with the 37 pin connector!
Cables as follows: Computer Line Out to microKEYER Line OUT
Computer Line In to MK Line In
Computer Mic to MK Mic In
DB37 to the MK and the other connections (remote, etc)
******************************************************
Good luck with it! The above setup got me there on the very first try...
> Subject:
> [WriteLog] WL & Microham-microkeyer
> From:
> KI9A@aol.com
> Date:
> Sat, 26 Feb 2005 12:16:51 EST
> To:
> writelog@contesting.com
>
> To:
> writelog@contesting.com
>
>
>Hello all,
>
>I just bought a new microham MK, and I am having a heck of a time getting it
>to function as a voice keyer..I am using WIN XP, so I bought the MK to do
>this via USB.
>
>I looked at the setup on WL, & saw the DVK column, which, for other than XP,
>uses LPT keying for the ports. MK uses a virtual serial port, so, how the
>heck do you set WL up to do this?
>
>I can get WL to key the rig via F2,ect...but, can't get any audio output, I
>am sure the soundcard is et up correct, the cables are right/good, but it
>appears to be in the WL setup.
>
>Any ideas before I try N1MM or another program?? I'd hate to stop using WL,
>it is such a fine program...Jeez, I'd hate to go back to the MFJ keyer.....
>
>73-Chuck KI9A
>
>
>
>
> ------------------------------------------------------------------------
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|