WriteLog
[Top] [All Lists]

Re: [WriteLog] SO2R Problem - one radio locked in xmit

To: "Bill G. K3SV" <k3sv@direcway.com>, writelog@contesting.com
Subject: Re: [WriteLog] SO2R Problem - one radio locked in xmit
From: Mike <k4gmh@arrl.net>
Date: Sat, 06 Aug 2005 16:13:57 -0400
List-post: <mailto:writelog@contesting.com>
Hello Bill,

Thanks for the tip as that got WL to recognize the second computer's freq. 
output.

Still have the xmit lock-up depending on which is selected in Ports.


At 12:40 8/6/05, Bill G. K3SV wrote:
>Hello Mike,
>
>If one of the radio freq's is not being displayed, try clicking (I'm doing 
>this in my head so might not be all that correct) on the area where the 
>freq should show and you should get a box that will allow you to manually 
>go in and set the correct mode and stuff, that should get your computer to 
>recognize both radios. I don't have things plugged-in at the moment and 
>I'm not crystal clear on it.
>
>73 Bill
>
>Mike wrote:
>
>>Hello,
>>
>>Need help in getting the pieces and parts hooked up for SO2R, but ran 
>>into a problem trying to get both radios to be seen by WL.  The following 
>>is situation:
>>
>>Trying to get SO2R with WL but seem to only be able to get a single radio 
>>to work even with two radio checked on the "Number of Radio" 
>>pull-down.  One radio is connected to comm 3 and the other to 4.  Using 
>>W98SE and WL V10.53E.  IC746s are the radios. "Ports-What is Connected" 
>>has the "All mode PTT on CW port RTS" checked.  Also, "Comm PTT" is "Yes" 
>>for both radios.
>>
>>What happens is when comm 3 is selected (Set-up > Ports), radio 1 can 
>>receive and xmit, but radio 2 is locked in xmit mode.  Vice versa when 
>>comm 4 is selected.  With the "Ports-What is Connected" "All mode PTT on 
>>CW port RTS" not checked, both radios are locked in xmit mode.  Changing 
>>the active radio, cursor up or down, does not free up the radio locked in 
>>transmit mode.
>>
>>The "Ports-What is Connected" view in "Help" is different from the 
>>V10.53E "Ports-What is Connected".  V10.53 doesn't have the "Rig" column.
>>
>>Also, WL is not reading the 2nd radio's freq. and displaying it.  Other 
>>S/W programs read and display the 2nd radio's freq. (CAT) okay.
>>
>>         73,
>>         Mike, K4GMH
>>_______________________________________________
>>WriteLog mailing list
>>WriteLog@contesting.com
>>http://lists.contesting.com/mailman/listinfo/writelog
>>WriteLog on the web:  http://www.writelog.com/
>>
>>

         73,
         Mike, K4GMH 
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>