Revised without all the gibberish before "Setup Ports".
>Hello,
>
>Getting ready to build a SO2R interface for WL and a pair of IC746s. The
>present design is using a comm. port for cw/ptt control and LPT (pin 14) to
>direct the SO2R controller to send the cw/ptt to either radio 1 or
>2. Question has to do with the Port setup. Is the design okay or does the
>cw/ptt have to come from the LPT for SO2R? Maybe the WL LPT Port pin
>assignment statement, "You need to set one of the LPT port buttons in the
>DVK column in Setup Ports to tell WriteLog to control the A/B output on
>pin 14." answers my
>question?
>
> 73,
> Mike, K4GMH
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog
>WriteLog on the web: http://www.writelog.com/
73,
Mike, K4GMH
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|