The plot thickens!! And this get even more strange.
I can confirm that I have networking between the 2 machines at the
Windows level. And, I think I have networking between the 2 machines
within WriteLog, and my reason for saying that is this. After doing the
"acquiring the network" and "linking" between the 2 PC's within
WriteLog, I try entering contacts, nothing. I try sending a network
"gab" between the 2 PC's, nothing. Now those 2 scenarios seem to say to
me that the network within Writelog is not working, however, if I shut
down just one of the instances of WriteLog on one of the PC's, the other
PC notifies me by way of the network activity box that PC "A" "Lost
network with PC "B"", and that seems to tell me that there is in fact a
WriteLog network established.
I really need some guidance on this one folks, as I've done all I can
think of to do in an attempt to get this running.
Does anyone in this group think that the fact that I'm running WriteLog
10.46G may be the problem? I'm going to upgrade to the latest version
but was hesitant doing so right before the NAQP contest.
Opinions, guidance, suggestions all very much appreciated.
Thanks in advance.
Bob, N3FR
> _____________________________________________
> From: Bob Crossland
> Sent: Wednesday, January 11, 2006 9:09 AM
> To: 'writelog@contesting.com'
> Subject: Networking question
>
> Hello to the group,
>
> I checked the archives for hints as to what may be going on here but
> couldn't locate a configuration just like mine, so thought what the
> heck, I'll ask the people who know what they're doing.
>
> My goal is to network my 2 contest computers with Writelog, and here
> is my configuration:
>
> - PC "A": Running Windows XP, Writelog version 10.46G
> - PC "B": Running Windows 95, Writelog version 10.46G
> - Both PC's connected to a router.
>
> I have gone through the configuration setups as directed by
> documentation from the Writelog site and so far have only been able to
> get to the point where I can share files between the 2 PC's, so they
> are at least networked.
>
> I then started Writelog on PC "A", and as instructed by the
> documentation, started Writelog on PC "B" using the same Writelog file
> that was started on PC "A" (and performed the "save as" etc.). I then
> went through the "link PC's to the network" steps, and to this point
> everything seems okay. The problem is , when I enter contacts on
> either of the PC's, they are not showing up on the other, so it
> appears they are not networked.
>
> I repeated all of the steps again but just can't get them going. Any
> suggestions would be very much appreciated.
>
> Thanks.
>
> Bob, N3FR
>
>
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|