Thursday, 3pm
Well, I'm totally flummoxed.
NOT yet working and I've verified and tried every switch combination on the
Piexx board. Made sure that the WL and Windows Ports matched the baud rate.
Using the 2nd PC, running Windows 98 & WL 10.50d
On the UX-14 Piexx board:
Switched to 4800 Baud.
Turned off the Transcieve mode.
Turned off the Smart Band Switch mode.
Turn off the RS-232 echo mode.
Each of these features performed as advertised, EXCEPT the rig WILL NOT go to
Frequency or Mode as commanded by WL.
Is my radio busted? Is the Piexx i/f busted? Probably not as I CAN command the
rig using other software (Logger32, N1MM logger, DF4OR's CI-V test program).
The only thing I can think to do is take the rig over to someone elses QTH and
see if my rig will work there.
Hopelessly and totally disgruntled and frustrated. Maybe its time to put this
rig away and concentrate on getting the IC-765 up and interfaced to WL.
Jerry/k6iii
San Jose, CA
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|